15 deals. For only 24 hours.

Enter your email below to get notified as soon as the doors to Black Friday open up!

* Etiam vitae tortor. Phasellus magna. Nullam accumsan lorem in dui. Curabitur blandit mollis.

best farmhouse sink for the money

How to wash and rinse dishes in a farmhouse sink?

For the classic look and greater working space, Farmhouse sinks have gotten quite a lot of popularity lately. According to Thewindupspace website, a farmhouse sink is designed while keeping the modern chef in mind. They’re massive and you can easily wash dozens of dishes at a time.

Since they’re so big, there are some steps you can follow to minimize wasting your cleaning detergents as well as properly do the dishwashing. In this article, we have compiled a list of 5 ideas you can follow to make your dishwashing easy on the sink.

5 steps to wash and rinse dishes in a farmhouse sink

farmhouse sink

Step 1 – Remove food particles

The first step before getting your dishes to the sink is to clean or scrape off the excess food parts. You can do it by hand or by flowing tap water. By doing this, you’re saving much water in the long run.

Step 2 – Stack your dishes by size

Depending on the size of your dishes, do the sorting. Put heavier plates on the bottom and smaller, lighter on the top. This ensures the plates do not get more pressure than they can handle and break afterwards.

Step 3 – Set a dry area to put the plates afterward

After cleaning the dishes, put them to a clean dry place to let them dry off. The water will rinse off easily. You can put a towel under the plates to keep the place dry or you can dry them up on the sink top. The water will drop down to the basin.

Step 4 – Use a detergent mixed water

If your plates are greasy then adding some detergent, soap or any cleaning agent into the water will help you clean the fats from the dishes easily. First allow the dishes to soak in the soapy water for some time and rub them with a cloth afterwards.

Step 5 – Cleaning and wiping the sink

Clean the sink well with running tap water and then dry with a mop. You should not miss the drying part, otherwise the leftover water can cause ugly water marks on the sink.


Q – Do you have to rinse dishes after washing?

Ans – Yes. You have kept all the dishes together in the same sink and if you don’t clean them well, there might be bacteria explosion on the dishes. You must rinse the dishes clean with water.

Q – Is it better to rinse your dishes in hot or cold water?

Ans – If you use a cleaning agent then both are fine. Hot water kills bacteria easily but cold water can do the same with a good soak in dish cleaner.

Q – Is it cheaper to wash dishes by hand or use a dishwasher?

Ans – It depends. If you have to clean a lot of dishes every time you do it and it fills the dishwasher then probably a dishwasher might be an option for you.

Q – What’s the major problem with white farmhouse sinks?

Ans – Mainly stains. They stain a little more than any other colors available. You should always use mild cleaners and don’t scratch the surface ever.


Cleaning dishes on a farmhouse sink is a very easy task. But knowing some of the dos and don’ts mentioned here will enable you to save dish cleaner and water by following some simple strategy.

​Read More

What Rights Do You Have as a Biker in the US?

The United States does not lack bike enthusiasts. Whether it is for entertainment or to save on costs or to be more health-conscious, riding a bicycle or a motorbike can serve many purposes.

In the US, each of the states has its own set of laws and rights of a biker based on their respective code statutes.

And today, we are going to talk about your rights. Yes, this article is about your rights as a biker in the US.

Let’s get started!

Things to Consider Before We Begin

In this article, we are going to have a look at some general rights and laws bikers have in the US. But before you start reading, please keep in mind that rights and laws vary from state to state, so this article is not exhaustive by any means.

So, we recommend going through your state’s list of laws on this topic to fully understand what your rights are if you are interested. We also recommend checking out the Bikers Rights blog for more details on your rights as well as fun reviews on different models of bikes and related gadgets.

Now, let’s dive in to learn more about your rights!

Common Biker’s Rights and Laws in the US

Bicycles are considered as a vehicle and therefore, has all the same rights as any other vehicle operator such as car or truck drivers do. Because of the same reason, bikers are also obligated to follow all the rules and laws that apply to vehicle operators. In short, bikers have the same rights and duties as other vehicle operators.

Rights and Laws for Using Public Roads & Major Highways

biking on public roads

If you are operating a bike on a public roadway meant for all vehicles (as opposed to specific bike pathways made for bikes only), then you should always do your best to remain on the right side of the road. But you can make exceptions to this rule; the circumstances in which you can are explained in the next two paragraphs.

When you need to take a left turn or an exit to a different highway, or to overtake a slower vehicle, or on a one-way road where you prefer to be on the left, you have the right to not follow the above rule. While passing a vehicle, make sure it is done in accordance with the local law; otherwise, you do not have the right to do so.

It also applies when there is a condition on or of the road such as parked vehicles, animals, surface hazards, debris, accidents, etcetera that prevents you from safely using the right side. Minors can use bicycles provided that they have helmets on and are properly trained to use a cycle.

Rights and Laws for Biking at Night

biking at night

You are also allowed to have as many reflectors and lights on your bike as you want. In the nighttime, you have the right to ride your cycle provided that you have equipped enough and proper headlights, taillights, & reflectors as the law states.

Rights and Laws Related to Signaling

bike hand signals

To signal stops and turns, you may use either of your hands as convenient. It is a legal requirement to always use hand signals to enlighten others about your possible stops or turns. If there is a chance of danger, you have the right to omit from signaling using hands. Follow proper rules when signaling.

Always make sure you have at least one hand on a handlebar, both of them, if possible, just to be safe. It is also allowed for you to pass cars on your right provided that they are slow enough to pass, and you are not doing it on the curve of a road or in any state where the other vehicle operator’s view is obscured.

Rights and Laws for Using Roads & Pedestals

You have the right to bike on any public road, bikeway, or streets except on roads with limited access and express highways where there are signs explicitly prohibiting bikes. Riding on sidewalks with a bicycle is permitted unless you are on a business strict or somewhere where local laws prohibit riding on sidewalks.

If you are on a sidewalk, though, always give pedestrians the right of way and signals that are loud enough to be clearly heard when passing or overtaking pedestrians. You can not ride a bike if you are under the influence of drugs or alcohol.

Rights and Laws for Bespoke Biking

bespoke biking

Cyclists can ride side by side and are allowed to do so, but more than two are discouraged or prohibited in some states because it can impede the flow of vehicles. You must also facilitate any vehicle passing by if you are doing this.

If you are carrying your bike in an RV, you might think you’re eligible to use the bike lane, that won’t be correct. As riding a bike and carrying it on an RV is different. What if you want to carry up to 4 bikes in your RV to enjoy cycling fun in your next vacation or camping trip?

In some states, provided that the road is clear and not a busy/major one, two or more persons may ride side by side, but it is discouraged for rider’s safety. You have the right to carry items with you, but make sure your hands are on the handles at all times, and the item being carried is not compromising your safety in any way.

Rights and Laws for Carrying a Passenger

carrying passenger

If your bike is equipped to carry more than one person or has an approved and connected child seat, you have the right to carry exactly as many persons the bike is equipped for; but in some states such as California, more than one person on a bike is prohibited.

Assuming that you are carrying children within a trailer or other vehicle that will secure them sufficiently and cover their heads in the event of a collision, they aren’t required to wear helmets, meaning you are not obligated to have them wear one.

Rights and Laws for Hosting Biking Competitions

bike competition

You may run a competitive bike race and choose any public road or street of your state provided that you are holding the race in conjunction with a well-known bike organization, and also, if you manage to get permission from the relevant law enforcement department before the race starts.

In these races, you have the right to enforce special bike rules and regulations provided that your sponsoring bike organization and the law enforcement department have both agreed to it.


That’s all the basic rights you have as a biker in the United States. When you are riding and practicing your rights, always make sure to put your and other’s safety above everything else. Happy riding!

​Read More
What To Look For Before Buying The Best HID Kit

What To Look For Before Buying The Best HID Kit?

High-Intensity Discharge Headlight often referred to as HID headlights; provide more focused and brighter illumination. Compared to halogen lights or even LED headlights, they are more energy efficient and provide a better quality of lighting.

HID headlights work by creating an arc between the two tungsten electrodes found inside a glass bulb that has Quartz, highly pressurized Xenon gas, and trivial amounts of metallic salts and Mercury.

The Xenon gas heats up because of the running current and gets to a temperature where it begins to emit a brilliant beam of light.

When compared to the standard halogen headlights, HID headlights provide 80-100% more light. This makes them an active safety feature because they drastically improve the nighttime driving experience of motorists.

HID kits allow you to upgrade from regular halogen headlights to High-Intensity Discharge headlights.

Tips for Choosing the Best HID Kit

Choosing a product that plays a role in dictating your safety behind the wheel is challenging. A lot of time and effort needs to go into evaluating each product in detail before making a purchase.

For me, research for any automobile safety product involves learning about the reputations of different brands and comparing their products side by side to determine their worthiness and effectiveness.

Even though choosing an HID conversion kit ultimately comes down to making a personalized decision. Here are a few key factors to consider when selecting the product to buy.


This is perhaps the most crucial aspect to consider when choosing an HID kit. Lumen is a term that refers to the brightness of a headlight bulb.

Even though HID lights generally produce more intense light than halogen bulbs, it is crucial to understand that light intensity and illumination quality are two different things.

To get it right, check the lumen count on the bulb package before purchase. In case the indicated number is high, this assures you of getting bright lights. Usually, a less intense bulb can still have a considerably high lumens count.


This refers to the electrical power used by a bulb. When the wattage number is higher, this means the bulb will use more energy. You need to choose a bulb that has a lower wattage count if you want an energy efficient product.

Typically, HID kits come with 35 or 55-watt bulbs. 55 wattage bulbs are more powerful, and the 35 wattage bulbs produce less heat. You need to put the pros and cons of both options on a scale before making your final decision.


The temperature of the bulb mainly determines the color output and overall illumination produced by HID kits. Do not get me wrong; the color output has nothing to do with the light intensity or the lumens count. It only indicates the frequency at which light is being emitted.

It pays to understand the laws of your state before making any decisions on color output. If you reside in the US, for instance, all street racing vehicles should have bright, white lights. Otherwise, you are free to choose whatever color you prefer.

Some of the popular light output options available are golden yellow and light blue. Again, ensure that it is legal to drive at night with these lighting hues within your area.

The temperature or color of an HID bulb is measured in K (Kelvins). Bulbs with a higher Kelvin count are cooler than those with a lower Kelvin count. Therefore, headlights with white or yellow color outputs have a lower kelvin count than their blue and purple color output counterparts.

Here is an HID color chart and headlight temperature scale;

  • Yellowish (3000K)
  • Bright white/yellow (4300K)
  • Purest white (5000K)
  • Bright white/blue (6000K)
  • Blue/White (8000K)
  • Light blue (10000K)
  • Medium blue (12000K)
  • Dark Blue (15000K)
  • Violet (20000K)
  • Indigo (30000K)

From my very qualified perspective, HID headlight bulbs with 3000K -5000K are the best. Even though the purple and blue lights are a real appeal for those who want to give their rides a fast a furious flair, they have a low light output. This makes them impractical for use during inclement weather.

Moreover, these color outputs are not legal in some jurisdictions because they could blind oncoming traffic.


Whether you are buying HID conversion kits or sneakers for your kid, longevity is an aspect you cannot afford to overlook. I like to think about the durability of a product as the aspect that assures me of a good return on investment.

Remember, I mentioned that 55 and 35 wattage bulbs have unique pros and cons. Well, one of the drawbacks of having those bright 55W bulbs is that they produce more heat, and this can affect the wiring and hosing.

Generally, 35W bulbs last longer than their 55W counterparts. The wattage of a headlight is even so not the sole factor that determines the longevity of an HID kit. It is also crucial to consider the quality of the construction of a unit. As well, take into account its temperature and recent customer reviews.


There are two main classifications of the ballasts of HID kits; DC and AC. DC ballasts run at a single, continuous voltage, and this gives them a greater energy output. They are, however, less energy efficient and tend to drain the battery faster. Another con of using DC ballasts is that they produce more heat.

AC ballasts, on the other hand, first convert the current and then send it to the bulb. They are cheaper, more energy efficient and produce less heat.


For the manufacturers of safety features for cars, it is unfortunate that good reputations do not just happen. It takes doing some serious heavy lifting for any brand to have an above-average reputation.

That said, I find it best to settle for products from renowned brands that have the backing of numerous impressive client reviews and testimonials.

Even manufacturers have to start from somewhere. I’m not saying that lesser-known brands are not worth it. Some of them have hit the markets with a bang and use innovative technologies to produce quite remarkable products.

 In case you want to buy a kit from a brand whose reputation cannot be established, at least make sure the unit comes with a reasonable warranty and possibly a money-back guarantee.

Ease of Installation

Let’s face it; a product that is hard to install can threaten your sanity. I once bought a cheap kit that got me so frustrated during installs that I dumped it in the bin instead of calling customer support. The unit shuttered my last bits of endurance because getting the installation steps right was rocket science.

Whether you intend to do a DIY installation project or enlist a mechanic, it is best to choose plug and play systems. This means you merely need to uninstall your old halogen bulbs, plug in the new kit, and before you know it, your headlights are upgraded!

Apart from considering the ease of installation of a product, also make sure it comes with all the required components. It is equally frustrating to have to order for capacitors or resistors separately.

Your Unique Needs

I recommend first ascertaining that a specific HID conversion system can retrofit your specific kind of car. Even though most kits are universal, some of them are not compatible with all vehicle models.

Additionally, consider how you intend to use your car. In case you plan to drive off-road frequently, for instance, nothing restricts you from choosing a unit with any color output that tickles your fancy.

In this case, however, it is of paramount importance to ensure that your product of choice is well constructed and water-resistant.

Final Words

What makes HID conversion kits highly sought after is that they make upgrading headlights easier. HID headlights produce a brighter and more focused beam, and this can enhance your safety when driving after sunset.

These lights also look good, are easy to install, and are customizable. You can choose from 7 color outputs to give your ride a truly personalized flair.

​Read More
How to Build Guinea Pig Cages

How to Build Guinea Pig Cages? A DIY Guide

It took me a while to ultimately give in to buying two guinea pigs for my son. I must say that the starter kit needed to become a pet parent is, in this case, somewhat expensive because I had to buy a highly-priced cage at the pet store.

The cage was of the right size, and it looked great for about 3 months. After that, our cute, long-haired guinea pigs started looking like fuzzy prisoners at Alcatraz. They had grown so big within such a short while, so it was time for us to create a customized space for them.

In this post, I’ll tell you all about the dream cage I created for our darling furry friends.


My idea was to create a comfortable yet simple and inexpensive house for my cavies. I was also keen on choosing an easy to clean design. My structure has a base cabinet that measures 60″ x 20″ x 18″ (tall) and the cage that measures 60″ x 20″ x 24″ (tall). Here are the materials I used.

  • Wire screen 10 x 2 feet          
  • Wood glue
  • 1/8″ plywood
  • 1X3 pine & 1×4 pine
  • Pocket hole screws

Step 1 – Installing the Frames

Use a hand saw, or a miter saw to cut down your pine planks into suitable dimensions. I recommend taking measurements beforehand so that you do not run into trouble before your project is complete. Get the joints glued, clamped, and screwed into place using the pocket hole screws.

To make your work easy, create “L” shaped corners. Join the long planks to the short ones to create a simple frame. It is okay to first use two 1 inch pocket screws in each joint. You can then add support if needed once the basic framework is complete.

Step 2 – Attach the Bottom and Sides

It is easy to attach the bottom once the frame is complete. Just nail it from inside the frame structure and use about 6 pocket screws to ensure it is firmly attached to the base. Because I really wanted to ensure cleaning the cage is a breeze, I added a sliding door to the bottom.

Attaching the sides is easy and quick. Use your screws to wrap the wire screen around the structure. Make sure there are no saggy areas.

Step 3 – Create the Sliding Trap Door

You are possibly wondering why I needed my structure to have a base. Well, the first story would elevate the cage from the ground to a level where the temperature is steadier.

Lifting the pen also makes cleaning more manageable because I place a bin directly below the sliding door at the bottom and rake out the soiled bedding with remarkable ease. Moreover, this base area also provides suitable space for feeds and other supplies.

Let’s dive into the steps involved when creating the sliding door. First, ensure the dimensions of your door are slightly smaller than the size of your bin. Once you get your measurements right, create the door frame separately, glue it up, and allow it to dry overnight.

Be sure to attach a handle to the door for smooth opening and closing of the sliding door. Additionally, see to it that the panels used are adequately sanded and smooth.

Step 4 – Final Touches

At this point, your structure almost looks complete. Before you wrap up the project, spray the whole cage with at least two coats of polyurethane spray, and apply appliance paint on the floor to help with moisture protection. Voila! Your guinea pig pen is complete and ready for use.

Tips for Getting the Correct Measurements

One of the most intricate parts of building a guinea pig cage is getting the measurements right. The materials needed for the project can be easily sourced from local hardware stores or online. Before deciding on the size of the structure to build, take note of the number of guinea pigs you have.

One guinea pig requires a minimum of 7.5 square feet cage, which is about 30″ x 36″. I have two guinea pigs, so I needed a minimum of 10.5 square feet, which is about 30″ x 50″. The whole idea of building a DIY cage is for you to create a comfortable space where your furry friends can grow, play, and enjoy their little world.

Tips for Choosing the Right Guinea Pig Bedding

Now that your structure is ready, you need to select the right bedding option for your guinea pigs. Just like rabbits, guinea pigs do not strictly use litter trays. This makes it imperative to choose an absorbent bedding material.

Some of the popular bedding options include wood shavings, layered towels, fleecing, and recycled shredded paper. I use fleecing and layered towels interchangeably because they are more efficient, washable, and reusable.

Both wood shavings and recycled shredded paper cannot be reused, and this makes it expensive to maintain a comfortable living environment for your guinea pigs.

The best part about using fleece blankets is that you can choose a fabric with unique colors to create the perfect piggy palace for your furry buddies.

The Details

Guinea pigs are social creatures that love fun, entertainment, and stimulation. It is the furnishing details that make their cage a perfect haven. Consider installing plastic tunnels where your pets can run around and dart in and out.

You can also use wood or plastic to create up and down ramps to keep your guinea pigs busy and active all day long.

Finally, install a hatch at the corner of the cage where the pets can hide away and sleep or relax. You could also choose to be a little creative in your selection of feeding bowls.

With a bit of imagination, you can give the cage an outstanding flair. This will, by extension, ensure your furry buddies have a suitable space where they can live a happy and enjoyable life.

Final Words

There is more to taking great care of a guinea pig than merely providing an area where it can feed and rest. Your pet needs an enclosed space for it to be comfortable and happy. If the store-bought cages no longer tickle your fancy, consider creating a customized one.

It is up to you to decide on the ideal materials, design, and dimensions to use. Consider your space restrictions and budgets and make sure that the structure you build will make your little furry friends feel safer and comfortable.

​Read More

Guinea Pig Food List: What Do They Eat?

If you are looking forward to bringing a little guinea pig home, one of the most important things you should know is what it eats. Well, these gorgeous chubby-cheeked fellows are herbivores, meaning they mainly eat plant matter.

It is crucial to ensure they get balanced nutrition to keep common concerns like obesity, chronic diarrhea, and kidney, heart, or liver disease at bay.

Your guinea pig needs foods that are high on fiber, such as pelleted guinea pig foods and hay. However, they only need small portions of fresh fruit and vegetables. Dive in, and ill share with you a detailed guinea pig food list.

Proper Feeding Schedule

Your little cavy needs to be fed on a consistent schedule. Make sure it eats at least two meals each day, in the morning and evening. In case you need to introduce new foods, do so gradually because abrupt or significant changes in their diets cause digestive problems and diarrhea.

Guinea pigs, just like cats and dogs, can overeat if offered the chance. Some tips can help reduce the risk of your furry friend becoming obese.

Always empty the pellet bowl of leftovers after an hour. Also, discard any vegetables or fresh fruits the pet has not eaten after every 24 hours. It is moreover good practice to clean out old food before adding new food to the feeding bowls.

It is crucial to ensure your cavy has adequate supplies of clean, chlorine-free water. Guinea pigs consume about 5 ounces of water each day, and they could consume more during warmer seasons.

Guinea Pig Food List

Guinea pigs need diets that are rich in fiber for proper digestion. They also need plenty of Vitamin C because this is a vitamin that their bodies cannot synthesize. 30–50 mg of Vitamin C each day helps to keep scurvy and other health concerns at bay.

Your cavy needs proper nutrition to live a long and healthy life. The right diet can see your furry friend live for 8 years or more. Here is a list of what cavies eat.


One of the vital parts of your guinea pig’s diet is hay. The pet needs plenty of fiber to keep its digestive system functioning at optimal levels. Additionally, chewing hay helps to manage the size of their ever-growing teeth by subjecting them to some degree of wear.

It pays to select the right kind of hay for your cavy. Timothy hay is my personal favorite because of its overall quality. Some hay brands are not adequately dried, so they develop mold and a nasty smell.


It’s hard to ensure your furry friend gets a balanced diet without depending on commercial guinea pig foods. These foods are uniquely formulated to have just the right dosage of essential nutrients and vitamin C.

Apart from ensuring that the product you choose is safe and approved; you must also follow the recommended feeding instructions to the letter.


According to the (HSUS) Humane Society of the United States, each guinea pig needs at least one cup of veggies daily.

You can feed your furry friend a range of organically grown greens, including cucumbers, spinach, carrot tops, Romaine lettuce, kales, peas, artichokes, broccoli spears, and other dark green vegetables.

You ought to introduce one vegetable at a time to avoid upsetting the digestive system of the pet. Wash all fresh produce carefully to remove pesticides and other farm chemicals. Also, it is best not to serve cold vegetables.


Fruits have higher sugar content. Even though they are rich in Vitamin C, it is better to serve more vegetables than fruits.

Guinea pigs have an insatiable appetite for pears, kiwi, peaches, papayas, apples, blueberries, oranges, and strawberries. Again, wash all fruits to remove farm chemicals and do not serve them cold.


Treats, fruits included should not exceed 10% of the overall food your guinea pig eats each day. Be careful of commercial products that contain artificial sugar, salt, or sweeteners. Before buying any product, read its label and know which ingredients it contains.

There are commercial treats that make fun chews for guinea pigs. Cavies love chewing on things, including blocks, balls, toys, and sticks to control the growth of their teeth. Chewable treats and guinea pig salt licks also help to boot out boredom.


Guinea pigs have unique nutritional needs. Cecotropes are tiny, soft droppings containing a host of nutrients from plants. When guinea pigs consume these droppings, they are instantly digested to provide an immediate nutrient boost.

Foods to Avoid

Feeding a guinea pig is fun, and it’s easy to go a little crazy on your food selection. Well, there are certain foods your pet would rather not eat for good reasons.

Some foods can poison your cavy while others have too much fats or sugar. Then again, some foods are choking hazards, cause bloating, or have zero nutritional value.

A summary of the goods you should not feed your guinea pig includes seeds, cabbage, peanut butter, and chocolate because it contains caffeine.

Your pet should also not eat mushrooms, garlic, onions, avocados, corn kernels, iceberg lettuce, nuts, rhubarb, meat, bread, bok choy, or any dairy products because they contain high levels of calcium.

The need to wash your fruits and vegetables before feeding them to your cavy cannot be emphasized enough. Also, do not give your guinea pig flowers, grass, or any plants from a garden that was recently fumigated with pesticides or other farm chemicals.

Anytime you let your pet loose to exercise and explore your outdoors, supervise what it eats because most houseplants can poison it.

What Happens When Guinea Pigs Do Not Feed Enough?

When you fail to give your cavy a balanced diet or adequate food, the ramifications are likely to be apparent in two weeks or less. You may begin to notice limping, lameness, poor coat quality, joint swelling, and shuffling.

Some of these symptoms escalate into pain any time the pet is touched. It could also show signs like abnormal bleeding beneath the skin, loss of appetite, and depression. The longer the pet stays without getting proper diets, the more severe the symptoms it will experience.

Eventually, the immune system of a cavy suffering from malnutrition shuts down. The animal begins to bleed internally, and it dies in a miserable and inhumane way. You should keep their cage clean too.

How to Keep Guinea Pig Food Fresh?

Guinea pigs need at least two meals each day. They also need a range of foods in their daily diets, so you have to meticulously remove uneaten vegetables, fruits, and other perishable foods each day before they go bad.

Any unfinished or uneaten treats should be removed at least an hour after they are served.

Pellets should, on the other hand, be replaced after 24 hours. After all, they have little or no nutritional value once they go stale. Additionally, guinea pigs are playful creatures, and they are likely to kick substantial amounts of bedding material into their food bowls.

This and any droppings they leave inside the food bowl will leave the pellets stale within a day.

Pellets are expensive, and it can be a little frustrating to throw away significant amounts of leftovers. In case you find too many pellets in the food bowl daily, consider reducing the serving to an eighth of a cup.

Final Words

As a responsible pet parent, you cannot take lightly the need to guarantee that the nutritional needs of your cavy are met. When a guinea pig does not get adequate Vitamin C, its body is unable to form connective tissue, so the immune system is unable to work correctly.

Guinea pigs are finicky eaters. They choose what to eat and will not have a bite of what they don’t like. To make things even more interesting, their dietary preferences can change overnight. In case you need more nutritional guidelines, consult a licensed exotic animal veterinarian.

​Read More
Do I Need A Relay Harness For My HID Kit

Do I Need A Relay Harness For My HID Kit?

Whether you need a relay harness for your HID kit or not depends on a variety of aspects. In some instances, the kit is not necessary, while in other scenarios, you must use it to dodge specific issues of concern.

For instance, the harness can help you bypass the factory wiring of your car and get power directly from the battery if you are experiencing low voltage problems, a CANBUS or DRL issue. Moreover, the kit can also help to reduce the warm-up time of your HID headlights.

By tapping power from the car’s battery to the headlight system directly, you make it possible for the HID ballast and the bulbs to function independently. In this case, the relay harness replaces your vehicle’s original wiring system to provide a more consistent and dependable power source.

Why Use A Relay Harness?

Typically, people use a relay harness in aftermarket HID conversion kits. This assists greatly in dodging intricate electronic control systems problems and also allows a higher current rate to get to the bulbs.

A relay harness uses a 30 amperage fuse electoral wire that connects to the positive terminal of the battery directly. This pulls the signal from the headlight connector and allows power to be channeled from the battery.

HID ballasts receive power through two sets of cables. You will also find two distinct ground wire terminals that ought to be attached to the chassis to complete an electrical circuit.

A List of Concerns a Relay Harness Can Fix

A relay harness can help you make the most out of your OEM or aftermarket xenon headlights. Usually, it can also be used to get more light from halogen, incandescent, and other forms of lighting.

It is capable of fixing a range of power issues allied with HID lighting, including low light output, uneven brightness, intermittent on/off, delayed start, and flickering.

Delayed Start

For an HID ballast to ignite it requires a lot of power. This initial demand for power can pose problems for some vehicles, especially those with weak electoral systems that simply cannot provide the required energy.

The factory headlight connectors of most cars cannot deliver the 7-8 amps per bulb that are needed to light HID headlights.

They can only provide enough amperage to light one HID headlight once the switch is turned on. The power consumption of the ballasts reduces to 3.2 amps within the first 20 seconds, and this is when the second HID bulb can turn on.

The delayed start is caused by insufficient power. Using a relay harness that taps power from the battery directly can help resolve this issue. The harness can instantly pick up 30 amps through the batteries from the positive terminal and ignite both ballasts without any delays.


When the HID ballasts are not supplied with enough power because you are using stock headlight connectors, your lights may flicker from time to time. This concern may also be caused by weak ballasts that cannot convert the required power and get the HID system correctly ignited.

A wiring harness can again provide reliable solutions for this problem. It will ensure enough power is supplied to prevent even weak ballasts from causing HID light flickering.

Low Light Output (Dim or Dark Lighting)

Underperforming ballasts can cause a low light output. The lights may seem dimmer or more blue than usual. This often happens when the weak ballast is unable to convert adequate power to light the headlights at a suitable range.

In this case, the HID wiring harness will ensure more power gets to the ballast. This ascertains that the lighting system can operate at pick performance.

Unfortunately, you are not guaranteed that this will address issues arising from having weak ballasts that cannot increase the light output, irrespective of the power input.

Uneven Brightness

Typically, cars don’t have equivalent amounts of power on each headlight. Whether the driver’s side will be brighter than the passenger’s side or the other way around will highly depend on the wiring configuration of a car.

That said, this imbalance may cause issues with lighting performance once a HID conversion kit is installed.

The headlight with lesser resistance to the wiring, connectors, and other sources of power will be the first to light up. This may result in less power going to the second headlight, and this means one bulb will be several times brighter than the other one.

In some instances, the concern is more manageable, and one bulb will power to full brightness faster than the other one.

Using an HID relay harness can again have this problem fixed. The kit will provide the same amount of power to the ballasts, allowing more consistent and even brightness from the two headlights.

Final Words

Some people use a relay harness to ensure their safety when driving at night and also prevent future lighting problems. On the other hand, you must use a wiring harness to successfully install an HID conversion kit in some vehicles.

I highly recommend using a relay harness even if using one is not mandatory. The kit will assist significantly in extending the longevity of your HID system because it has an inline fuse that protects both your lights and car.

Moreover, the wiring harness will help increase the light output by delivering adequate amounts of power to your HID ballasts.

​Read More

COPYRIGHT © THE Art101brooklyn 2020